Steel PoosheshAlloy Pishro
Steel PoosheshAlloy Pishro
Steel Pooshesh (registered as Alloy Pishro) has worked in Tehran’s steel bazaar (Bazaar-e Ahan) for more than 30 years. We supply sheet, plate, pipe, tube, round bar and coil in the 300, 400 and 200 series, from our own stock and imports, and otherwise through direct access to the bazaar’s supplier network, with no extra middlemen. Every order comes with a mill certificate.
Our access is not the same for every grade, and we say so up front.
Quick supply, including the heat-resistant grades.
No fixed stock, but can be sourced through the same bazaar network.
Sourced to order; ask for the lead time when you enquire.
Finishes 2B, BA, No.4 and No.1. Common sizes 1000 × 2000, 1250 × 2500 and 1500 × 3000 mm.
Seamless and welded. Schedules 5S, 10S, 40S and 80S to ASME B36.19M.
Bar and shafting for machining. Flat bar, angle and box section to order.
For slitting and forming. Common widths 1000, 1220, 1250 and 1500 mm.
Sizes shown are common market sizes, not a stock list. Ask for the exact size and thickness you need.
Four grades cover most of what customers ask for. The full guides are on the Persian site.
The base austenitic grade: good general corrosion resistance, forming and welding. Food equipment, industrial kitchens, process tanks and interior architecture where there is no chloride. Works continuously up to 925 °C.
Molybdenum adds resistance to chloride and pitting: marine splash zones, chemical and pharmaceutical plant, salt or acid. The temperature ceiling is the same as 304. Choose the L version when the part is welded heavily.
The stabilised grade, for parts that work continuously in the 425–870 °C range, where ordinary 304 can become sensitised.
The highest working temperature in the 300 series: 1150 °C continuous, 1035 °C intermittent. Low carbon keeps it weldable. Used for muffles and furnace parts.
A call or a WhatsApp message is enough. Three things get you the fastest answer.
Grade, form, size and thickness (for pipe, the nominal size and schedule), and the quantity.
Tell us if the part is welded, what it touches (chloride, salt, acid) and the highest working temperature.
A quick answer on availability, price per kilogram in Toman and delivery time. For most main-tier grades, within minutes during working hours.
Yes. Every order comes with the mill certificate, in any grade and any quantity. It shows the standard the material was made to and its chemical analysis.
Mainly mills in China and India, through our own stock and imports and through direct access to the bazaar’s supplier network.
No. Part of the range is in our own stock; other sizes and grades are supplied through the bazaar network. Duplex, super duplex and PH grades are supplied to order, and we say so at the start of the conversation.
Prices move with the nickel price and the exchange rate, so we quote per kilogram, in Toman, on request. There is no published price list.
Choose 316 when there is chloride, salt or a marine environment. Without those, 304 is usually enough and more economical. 316 does not raise the temperature limit.
Yes: sheet, pipe by schedule and round bar. The calculator page is in Persian.
Unit 90, Pars Ghadir Trade Complex, Km 4 Fath Highway, Tehran, Iran
Phone: +98 21 6639 2691 and +98 21 6639 2692
WhatsApp: +98 904 879 5516
Saturday to Wednesday 8:30–17:30, Thursday 8:30–13:30, Friday closed (Tehran time)
Stainless steel prices in Iran change with the nickel price and the exchange rate, so we quote per kilogram, in Toman, on request. Call or message us with the grade, form, size and quantity.